利来国际w66最老品牌

02545

Air Reciprocating Saw

Introduction

    The tool is equipped with a 32T saw blade and supplied with one 24T saw blade and one 32T saw blade, with speed of 9000 BPM
    Capable of cutting iron sheets with a thickness less than 1.6MM, and aluminum sheets, FRP, plastics, etc. with a thickness less than 2MM
    Locking device safety trigger available, avoiding accidental startup
    Adjustable guard, allowing users to adjust the cutting depth
    Air tools warranty
    -Warranty scope
    Subject to the regulations specified in the following Section "Non-warranty scope", all air tools marked with SATA trademark are provided with a 3-month warranty period from the date of purchase, and during normal use, if the functions are impaired, they can be repaired or even replaced at the SATA designated service center for free. The repaired or replaced ones are still covered under this warranty within the remaining warranty period.
    -Non-warranty scope
    The air tools without the SATA trademark are not covered under free warranty. Any damage caused by abnormal use is not covered under free warranty.
    The wears caused by the product fatigue due to continuous use are not covered under free warranty.
    The repair or unauthorized disassembly by non-SATA designated service center, or the damage caused by use of non-SATA parts are not covered under free warranty.
    If the product has rust, plating peeling off, surface scratches, or broken plastic handles after use, it will not be repaired or replaced under warranty.
    If the product warranty card fails to be provided within the specified time, the product will not be repaired or replaced under free warranty.
    -About replacement or repair
    The user shall fill in the “SATA Air Tools Warranty Card Receipt” completely within one month from the date of purchasing the SATA air tools (namely, 30 days from the date on the proof of purchase, the date of postmark on the product parcel sent at the time of purchase shall prevail), and post it together with a copy of a valid proof of purchase to SATA. Overdue shall be deemed as waiver of warranty.
    For the product damaged during the warranty period, please bring the original or copy of the proof of purchase to the nearest SATA designated service center for free repair and even replacement.
    -Service and counsel
    If you do not understand the warranty clauses of the SATA air tools, or you are not satisfied with the services provided at the designated service center, you can contact SATA Tools (Shanghai) Co., Ltd.: (021) 6061 1919 or 400 820 3885, 800 820 3885
    -Interpretation right
    SATA Tools (Shanghai) Co., Ltd. reserves the interpretation right of above clauses.

Product Details

Product No 02545
Noise level dB(A) 88
Length(mm) 279
Width(mm) 36
Height(mm) 68
Net Weight(kg) 0.65
Air Inlet Size 1/4"
Minimum endotracheal diameter(mm) 10
Working air pressure(KGF/CM2) 6.35
Vibrancy(M/S2) 17.8
pcs/Set The tool is equipped with 32T saw blades, with 24T and 32T saw blades each
Warranty Terms Three months warranty, pneumatic tools warranty terms, please see 'Introduction'
Special note Noise level is A sound pressure level. Working pressure refers to the dynamic pressure measured at the product inlet when the product is idling. Tightening bolt capacity refers to standard torque that meets the specifications of DIN267 grade 8.8 bolts
MADE IN Taiwan,China
Saw blade specifications 32T、24saw blade9000
Reciprocating time(BPM) 9000
Average air consumption(CFM) 9

Related Products

Download Our Catalog